Flat-pack bookshelf · Assembly instructions
Assembly instructions sheet for a flat-pack bookshelf, drawn as an exploded view. The left side panel is pulled out sideways with its dowels and cam bolts on their axes, the top and bottom panels show their cam locks lifted above their holes, the back panel is pulled away behind with its screws, and the three shelves slide out to the front. Ten numbered balloons match a parts list with quantities, and a hardware check-list shows 8 dowels, 8 cam bolts, 8 cam locks, 12 shelf pins and 16 screws.
A
EXPLODED VIEW
Each part pulled out along the direction it goes on
1
2
3
4
5
6
7
8
9
10
HARDWARE
Check you have every fitting before you start.
6
8x
Dowel
7
8x
Cam bolt
8
8x
Cam lock
9
12x
Shelf pin
10
16x
Screw
PARTS LIST
ITEM
PART NAME
QTY
MATERIAL
1
Side panel
2
melamine board, 18 mm
2
Top panel
1
melamine board, 18 mm
3
Bottom panel
1
melamine board, 18 mm
4
Shelf
3
melamine board, 18 mm
5
Back panel
1
hardboard, 3 mm
6
Dowel
8
beech, 8 x 30 mm
7
Cam bolt
8
steel
8
Cam lock
8
zinc alloy, 15 mm
9
Shelf pin
12
steel, 5 mm
10
Screw
16
steel, 3.5 x 16 mm
NOTES
1.
Not to scale. Shown from the front left.
2.
Push dowels (6) and cam bolts (7) into a side (1).
3.
Fit top (2) and bottom (3); turn each cam lock (8)
a half turn clockwise to pull the joint tight.
4.
Fit the other side the same way.
5.
Screw on the back panel (5); it squares the case.
6.
Push in shelf pins (9), then slide in the shelves (4).
TITLE
Bookshelf, flat-pack
Assembly instructions
DWG NO.
AI-204
SCALE
NTS
SHEET
1 of 1
TOOLS
Screwdriver
PROJ.
Axonometric
REV
A